Berofix 400 PCI Baseboard ( with max. 16 Channels G.711 incl. HW EC )
The berofix card series is a powerful and flexible hardware solution to connect ISDN (BRI,PRI) and GSM lines to any SIP based VoIP system. Due to the special design of the hardware berofix will be detected as a standard Network card by the operating system. Usualy the driver for this network card will be loaded automatically by the OS. The berofix card series has a modular concept and supports the following hardware DSP based Voice-Processing features.
Features:
• G.168/G.165 Echo cancellation with echo path change detection, up to 128ms
• Codec translation: G.723.1 and Annex A, G.729a, G.726, G.711u/a
• DTMF detection and generation
• T.38 fax relay (V.27,V.29 and V.17)
• SIP over TCP with SRTP and TLS (available Q4 2009)
• Hardware Conferencing (available Q4 2009)
• DSS1, EuroISDN conform (features set: COLP,CFU/CFB,CFNRY ...) (available Q4 2009)
• Q.SIG Basic-Features set: CNIP,CNIR,CONP (available Q4 2009)
• PCM Bus interconnection between berofix cards to enable hardware bridging for transparent voice,data and Fax transmission via optional PCM-Bus cable. (available Q4 2009)
The berofix card series consist of a baseboard and the so called LineInterfaces. Each baseboard can carry up to two Line-Interfaces. The berofix 400 provides you 4 Complex Channels which can be used as described in the following schema:
Media Function | Berofix 400 max. Channels | Berofix 1600 max. Channels | Berofix 6400 max. Channels |
G.711 incl. HW EC | 16 | 64 | 128 |
G.726 incl. HW EC | 4 | 16 | 64 |
G.729 incl. HW EC | 4 | 16 | 64 |
G.723 incl. HW EC | 4 | 16 | 64 |
T.38 | 4 | 16 | 32 |
Bridging Hairpinning | 32 | 128 | 512 |
Berofix Family Full Featured Channel Densities
The following Line-interfaces are available and can be plugged on the berofix card series
• BF4S0, 4 Port BRI module
• BF1E1, 1 Port PRI module
• BF2E1, 2 Port PRI module
• BF1GSM,1 Port GSM module (available Q4 2009)
• BF2GSM,2 Port GSM module (available Q4 2009)
Additionally to the baseboard and the Line-Interfaces the following accessories are available for the berofix card series:
• bf4S0Bridge (to use all 4 RJ45 slots on a baseboard with one bf4S0)
• bnTAdapters (to connect 2 BRI Lines on one RJ45 slots)
• bnPCM Cable (to interconnect berofix baseboards)
• bnE1Crosscable (to connect berofix E1 ports to other systems)
Due to the modular concept you can mix PRI,BRI and GSM ports on one card with full above mentioned features which makes the berofix cards very unique
Download here the Berofix Technical Datasheet
| EAN Code | BNBF400 |
| Price | € 373.89 |